Beartech Magmount, Openpilot Magnetic Mount SET for Comma Device

Load image into Gallery viewer, Beartech Magmount, Openpilot Magnetic Mount SET for Comma Device

Beartech Magmount, Openpilot Magnetic Mount SET for Comma Device

Regular price: $61.00
Sale price: $61.00
Regular price
Unit price: per

Option

Quantity

Quantity must be 1 or more

Openpilot Magmount Magnetic Mount Premium SET for Comma Device

**Flash Sale**
Now offering a starter combo with a discounted price for:
1. Magmount set + Carry Case + Screen Protector (4 matte)
2. Magmount set + Carry Case
3. Magmount set + Screen Protector (4 matte)

🚨 Important Update for Magmount V2:

Magmount V2 is now available! — heat-tested, screw-fastened, fan-safe, stronger hold (plus a travel rack option)

After 11 months of feedback and hundreds of hours of 65–85 °C soak + heat-cycle testing, Magmount V2 is ready. We listened, broke things, fixed them, and iterated until it sticks (literally). Huge thanks to everyone who waited and sent detailed reports—you shaped V2.

What’s new vs V1 (quick hits):

Sticks better: Thicker 3M VHB for curved windshields + pre-applied VHB on the windshield mount side. Adhesion promoter kit included. Included Magmount holder acts like last line of defense, hold your Magmount in place.

No more glue failures: Device mount is now mechanically fastened with 6 heat-set inserts + screws near the bracket for even load. Survived ~1 week at 85 °C in chamber tests.

New C3X Fan friendly: Added a galvanized steel shield between magnet and device to cut magnetic field ~80%—addresses the C3X slow-fan concern.

Stronger hold: Larger magnet = about +50% total magnetic strength.

Tough cabling: Upgraded to a braided cable for better wear resistance.

Simpler buying: One kit, all accessories included (no more tier confusion).

Options if magnets aren’t your thing: We also built a Slidemount (a sliding quick mount) that locks mechanically. https://shop.tlbb.ca/products/beartech-slidemount

Travel / no-VHB? Our Suction Rack works with Magmount—perfect for tinted windshields, rentals, road trips, or anyone who doesn’t want adhesive on glass. https://shop.beartech.ca/products/suction-rack

Support & thanks: We’ve already sent replacement device mounts to folks who reported V1 splitting. If we missed you, DM us (or reply to your order email) and we’ll make it right. Thanks again for sticking with us—V2 exists because of you. 🙏

For detailed documentations, explanations, and installation instructions, please visit: https://docs.innoisle.com/

If you'd like to stay in the loop, please join our discord: http://discord.innoisle.com/

Vehicles that require Angle Wedge:
Toyota Highlander (8 degree)
Honda Pilot (8 degree)
Ford F150 (8 degree)
Ford Maverick (8 degree)
Rivian Truck & SUV (8 degree)
And any windshield that makes your comma device tilt more than 5 degree

Q: What is a Dummy mount, and why do I need a premium package?
A: Depends on your use case. Premium has one dummy mount that offer a way to mount your device under dash or steering wheel when you car is in park. Potential thief can’t see what’s under the steering wheel or under dash from peeking over the window.
Premium also has more mounting accessories that help make the mount stick better.
There is no circuitry inside the dummy mount. You can only hang your device for storage.

Description

The Magmount is your go-to magnetic mount for the comma device, featuring 24 pogo pins for a full-feature Type-C connection and optimized internal wiring for top-notch signal quality. It’s super slim at just 17mm and includes a handy 1/4-inch thread for camera tripods, making it both functional and versatile. Plus, with concerns about smash-and-grab thefts on the rise, our premium set comes with a dummy mount that lets you securely stash your device under the dash, keeping it hidden and cool. Just grab it and attach it to the windshield as you get in—no more fussing around with glove boxes or center consoles!

What is included in the Magmount Premium Set:

Device Side Mount x1 (Mount Set) - With Magnetic Shield

Windshield Side Mount x1 (Mount Set) - With VHB pre-applied

Mount Cover x1 (Mount Set)

Dummy Mount x1 (Mount Set)

8 degree Angle Wedge x1 (Accessories) - With VHB pre-applied

Magmount Holder (0 degree and 8 degree) x1 (Accessories) - With VHB pre-applied

Comma Mount Adapter x1 (Accessories)

Magmount Cover B x1 (Accessories)

45cm Type C Cable x1 (Cable Set)

13cm Type C Cable x1 (Cable Set)

Wet & DryWipe x4 (2 VHB Pack)

IPA Wipe X4 (2 VHB Pack)

3M VHB Tape x4 (2 VHB Pack)

Static Film x4 (2 VHB Pack)

Adhesion Promoter Wipe X4 (Adhesion Promoter Pack)

PE gloves X2 (Adhesion Promoter Pack)

Allen Key x1 (Set Screw Pack)

Set Screw x1 (Set Screw Pack)

Device Mount Bracket x1 (Replacement Parts)

Phillips screwdriver x1 (Replacement Parts)

Phillips screw x2 (Replacement Parts)

What is included in Windshield Magmount:
1. Magmount Set Pack:
- Windshield Side Mount x1
- Windshield Mount Cover x1
(Prevent short-circuiting after the device is pulled off)
2. Type C pack
- 45cm Right Angle Head Type-C to Stright Type-C Cable
(Connect harness box and the Windshield Side Mount)
3. VHB Tape pack
- Cut to size 3M VHB Tape x2
(Stick the Windshield Side Mount to Car Windshield)
- Wet & Dry wipes x2
(Clean the windshield before apply)
- IPA wipe x2
(Clean the windshield before apply)
- Static film x2
(Stick to the windshield before sticking the VHB tape for easy removal in the future
ONLY stick to glass (no tint on the windshield)
If the temperature in your area is above 40C (or 104F), static film is not recommended)

What is included in Device Magmount:
1. Magmount Set Pack:
- Device Side Mount x1
2. Type C pack
- 13cm Right Angle Head Type-C to Right Angle Head Type-C Cable
(Connect the comma device and the Device Side Mount)
3. Allen Key x1

Angle Wedges (Compatible with both Magmount and Slidmount):
1. 8 degree mount
2. 16 degree mount
3. VHB pack

Comma mount adapter (Compatible with both Magmount and Slidmount):
1. Comma mount adapter
2. VHB pack

Magmount Cover B (Only compatible with Magmount):
1. Magmount Cover B

All the electronic components on this device are AEC-Q100 & AEC-Q200 qualified.
All the connecting parts are from original equipment manufacturers.
Assembled in Canada. 3D printed case with ASA-CF automotive grade and UV resistant plastic.

How to get customer service for the product issue:
Question of setting it up?
- Documentation: https://docs.innoisle.com/
- Discord: https://discord.innoisle.com/
Product defect warranty and help request:
- Email us at `info@beartech.ca` If you purchased from `shop.tlbb.ca` or `shop.beartech.com`.
- Send us a message on Etsy with your order number if you purchased from our Etsy store.

I can't imagine a better solution for the Comma device!

Not only does this solve the issue of having to carefully remove and reinstall the device, which would even be a hassle with a "Slide Mount" system since the car gets cooked in the sun since it parks in the driveway, but their customer support was amazing in not only their helpfulness but also their responsiveness. I will always be a repeat customer of an operation like this.

Bought this mount for my Comma 3x in my Rivian

Bought this mount for my Comma 3x in my Rivian R1T. The quality is fantastic, and they give you so many extras to ensure you're able to mount it multiple times. I've been using it for over a month in the Texas summer heat and it's been 100% perfect. I HIGHLY recommend you purchase it too. Makes it so easy to take it down and store it for security purposes.

Comma's missed opportunity

4,4 stars! Living in the real world and not in San Diego will expose your vehicle to significantly high temperatures, and this magnetic mount makes securing your comma in a safer location out of direct sunlight too easy. Once installed, it's easy for non-technically inclined drivers to use while they're out and about in the summer.
The only problem is that the installation instructions were less than crystal clear for certain installation scenarios, requiring full read-throughs to determine which seemingly critical steps are actually optional. I'm fairly technically inclined, and I had to watch the instruction video fully through to comprehend the nuances of the written instructions. My C3X was off the windshield for about 3 weeks before I could install this, but it seems like it is angled down more than previously, making some lights difficult for the comma to see.

Much better than the stock mount! So easy to use

Much better than the stock mount! So easy to use and install

Wish I had gotten this sooner!

When I first saw this mount I thought “Oh good more wires and “stuff” sticking out. No thanks.” But I couldn’t have been more wrong. This thing is amazing. First, it looks great. The excess cabling I had before is gone. One perfect length cable to the mount is it! Second, the magnets hold my C3X through anything, probably short of a serious wreck. And not having to unplug and plug in the finicky cable every time I take my C3X down and put it back is awesome. If you live someplace hot, this mount is a requirement. And it was super easy to install, and Beartech is super responsive if you need ANY help. If you’re on the fence, get off and get one. You won’t regret it.

1 2 3

Beartech Magmount, Openpilot Magnetic Mount SET for Comma Device

Customer Reviews